Home Product Sections Faqs Contact Us

PLEASE RING FOR COMPETITIVE PRICES ON MOTORCYCLE BRAKE LINE KITS

Goodridge Motorcycle Brake line kit Application list

GOODRIDGE

Hel Motorcycle Brake line kit application list

HEL PERFORMANCE

 

BGC CAN SUPPLY GOODRIDGE READY MADE BRAKE LINES AND OIL COOLER LINES WHICH CAN BE SENT DIRECT TO REDUCE THE LEAD TIME. WE CAN ALSO BUILD THEM IN HOUSE USING THE REUSABLE RANGE OF FITTINGS

WE ALSO SUPPLY PARTS FROM EARLS AND AEROQUIP AS WELL AS OTHER MANUFACTURERS

WE HAVE BEEN SUPPLYING HOSES AND FITTINGS TO THE MOTORCYCLE, CAR, KIT CAR AND RACING MARKET FOR OVER 20 YEARS AND HAVE EXPERIENCE IN THE PREPARATION AND RACING OF MOTORCYCLES AT WORLD ENDURANCE LEVE

 

HEL PERFORMANCE PRODUCTS

Brake Lines, Oil Cooler Kits, Adapters, Hose And Fittings 

HEL Performance have one of the largest ranges of performance hose and fittings available within the industry today. Many of the other major performance plumbing suppliers use us as a one stop solution to any unusual requirements they have been sent - They know that with our vast knowledge and unrivalled product range we will be able to supply, manufacture or source the correct fitting to meet any specification.

Whether it is an off the shelf item or a complete one off installation, HEL Performance have the staff, knowledge and historical background to supply you with the best solution to your performance hose needs.

If you require a single motorcycle brake hose or a thousand motorcycle hose assemblies you can be sure that HEL Performance can supply you with the product, quality and price you require.

 Introduction

Despite what the salesman tells you - every modern motorcycle has compromises normally instigated by accountants rather than engineers. One such compromise is the materials used for the brake hoses on your motorcycle. Rubber hoses or mild steel fittings are cheap but we all know how rubber hose bulges under pressure, allows brake fluid to absorb water vapour from the atmosphere and that mild steel fittings rust....

We manufacture a complete replacement stainless steel brake line kit for any motorcycle which is fitted with a hydraulic brake system and as we only ever use stainless steel fittings for the motorcycle marketplace so we can offer the HEL Lifetime Warranty on all brake line kits.

They are manufactured from the highest quality stainless steel swaged fittings permanently attached to a stainless steel braided Teflon hose. 

The HEL Performance Brake Line fittings offer safety, security and a slim line attractive finish. All hoses can be supplied to the FMVSS-106 standard and the kits contain all items required for a complete installation including stainless steel banjo bolts and copper washers.

Plain Stainless Steel Fittings 

We only ever use stainless steel fittings for the motorcycle marketplace so we can offer the HEL Lifetime Warranty on all brake line kits. We have again changed the industry for the better by informing riders of the dangers of using Aluminium brakeline fittings on stainless steel hose. When an aluminium fitting is placed on a stainless steel hose and the two parts are contaminated by salt water a reaction takes place between the metals which corrodes the aluminium fitting - Don't settle for anything other than stainless steel....

PVC Protective Covers 

                                            Our brake line kits can also be provided with a pvc cover available in either clear, red,              

                                            yellow, blue, neon blue, orange, black, purple, deep purple, green or carbolook to protect

                                            paintwork and fairings.

 
                                            This pvc cover is extruded onto the hose during manufacture so it adheres to the braid and

                                            does not ripple like heat shrink covers normally do. We only ever supply our hoses with this

                                            protective cover and since introducing them to the marketplace other companies have followed

                                            our lead and we are proud that the quality initiatives we put in place are imitated within the

                                            industry.

Coloured Stainless Steel Fittings 

HEL Performance Coloured Stainless Steel Brake Line Fittings - The Only Ones Available In The World                                            We are aware that some customer's like the colour combinations offered by ally fittings but

                                           require the strength of stainless steel which is why we have brought out a new range of coloured

                                           stainless steel fittings - The only one's currently available in the world...  They are available in

                                           Red, Green, Blue, Black, Purple and Gold so you can still have the full choice of colour but with

                                           the added security, strength and reliability of stainless steel. The coloured finish is also UV

                                           resistant so they won't fade in the sunlight and are backed by our lifetime warranty - So what's

                                           stopping you ?

 

HEL Performance Titanium Fittings And Banjo Bolts

                                            If you are looking for the most advanced materials  available anywhere in the world for your

bike then the HEL-Titanium brake line kits are for you. We manufacture a complete replacement stainless steel braided brake line kit with Titanium fittings and Titanium Banjo

Bolts for any motorcycle which is fitted with a hydraulic brake system. They are manufactured

from Titanium fittings permanently attached to a stainless steel braided Teflon hose. The HEL

Performance Brake Line fittings offer safety, security and a slim line attractive finish - And with

the addition of our new range of Titanium fittings can save you weight as well. Our Titanium

       fittings save you 60% weight compared to our Stainless steel fittings.

 

Motorcycle Oil Lines

HEL Performance Use Aeroquip Stainless Steel Braided Hose For Their Oil Line KitsHEL Performanec Oil Line FittingHEL Performance Oil Line Assembly                                    Most motorcycle engines have a lubrication system that includes an oil pump, some form of oil tank

                                    and a delivery system. Any external oil lines on a bike have a very hard life which may see internal

                                    temperatures exceeding 100 degrees centigrade and external temperatures dropping below freezing.

                                    They have to be capable of withstanding pressure over 100 pounds per square inch, remain flexible if

                                    made of rubber or resist fracturing if made of metal...

 

What do they have to withstand ?

All this and the ability to withstand engine vibration and exposure to extreme weather conditions... But there is a cure - Any original manufacturers oil lines can be replaced using the HEL range of high performance oil hose and fittings. Our range of stainless steel braided oil hose offers a minimum burst pressure of 5,000 psi, features a patented AQP elastomer which is resistant to oxidation, the effects of ozone and various other agents within air...

HEL Performance Oil Line Kits

HEL Performance Oil CoolerHEL Performance Oil Cooler Kits                         Should you choose the aluminium Aeroquip fittings on Aeroquip stainless steel braided oil hose or HEL

                         Performance stainless steel fittings on stainless steel braided oil hose - You will find that we hold the answer

                         to any performance plumbing requirement you may have and in different material options to suit any budget

                         or design

 

 

How much energy does an engine produce ?

We all know that the internal combustion engine is not as efficient as it could be. It loses energy through friction and heat loss. But what most people are unaware of is how much energy is lost as heat and how much more heat is created from the same engine once it has been tuned... The potential energy which goes in through the carburettors of a mild road going four stroke 750cc four cylinder engine is about 350bhp - Yet the amount of power it actually produces is approximately 90bhp - Real power is generally 25 - 30% of potential. The rest goes in overcoming friction of the moving parts, pumping air in, out and around the engine, exiting through the exhaust and in heat loss. 

In fact more than 30% of the potential power is wasted as heat energy - more than is produced as useable power... 

Why doesn't the engine melt ?

Why doesn't the engine melt ? Where does all the heat go ? It goes into the oil, the body of the engine and into the oil cooler. And if the bike doe not have a cooler ? - Well if it has enough fins and a massive amount of air to cool everything it may be okay - otherwise expect short engine life, seizure, breakdown of the oil....

Engine oil works best between 70 and 80 degrees centigrade although it's generally safe up to 100 degrees centigrade. Oil stops doing it's job when it gets too hot. So you can now see the importance of fitting an oil cooler to your bike to improve cooling efficiency and improve power. Take a look at any racing bike - the oem cooler has been removed and replaced with a larger more efficient oil cooler to maximise power... 

HEL Performance Oil Cooler Kits 

Our Performance Oil Cooler Kits consist of :

·       aluminium high performance oil cooler (approx 15% - 20% more cooling efficiency than OEM), 

·       aluminium billet mounting brackets, adapters to connect hoses to engine take offs

·       oil cooler hoses themselves

·       adaptors when required

The hoses are manufactured from Aeroquip high performance stainless steel braided hose with either Aeroquip aluminium reusable fittings or HEL stainless steel permanently attached fittings.

GOODRIDGE PERFORMANCE BRAKELINES

• eliminates spongy feel

• improved braking efficiency

• abrasion and corrosion resistant

 

Goodridge Brakeline Kits

Goodridge Stainless steel motorcycle brakeline kits feature the finest quality hose, consisting of a PTFE inner and a stainless steel outerbraid. This eliminates the spongy feel under arduous braking conditions giving greater braking efficiency as well as providing a superior resistance to abrasion and corrosion. These kits not only provide reliability and safety demanded, but offer brilliant looks that improve the

appearance of any bike. We pride ourselves in being able to supply stainless hydraulic brake line kits for any make or year of motorcycle, be it British, Japanese, American, German or  Italian. When ordering any non-standard motorcycle brake line please specify the overall length or where possible supply the original lines to ensure exact duplication.

 

Colourflex

Construction: Produced in a stunning variety of translucent colours using a

Hitrile Bonding during manufacture - it will stay flexible and will not discolour

over time. This new and exciting product is designed for the rider who has fitted

their bike with either carbon or colour coded parts and wishes to compliment

them with coloured brakelines; available in yellow, blue, red, purple, green, carbon

look and clear cover. Pre-made kits available, call for application guide.

 

BRAKELIGHT BANJO BOLTS

Goodridge – providing a service with hose, fittings and ancillary products that have a world-wide reputation for strength and reliability demanded by professionals. Products that deliver superior performance in critical applications where quality is essential. Goodridge have been supplying high performance hose and fittings for over 35 years and were the first company in Europe to offer such a service. These products are now supplied worldwide for every conceivable type of motor sport, fast road car and motorcycle applications, original equipment manufacture & marine and mountain bike uses. Goodridge are justly proud of the high quality of standards achieved throughout their product range and this is attributed totally to the quality control disciplines. Our modern manufacturing facilities allow the production of one off or quantity specials to customers’specifications in a variety of materials.

In addition to service provided by stockist personnel, our highly-qualified engineers work with original equipment manufacturer designing fluid transfer and hydraulic systems. They are also available to analyse problems, which may arise in the field, and to recommend solutions. Our technical representatives are trained to give all clients a total service supported by many years of experience in motor sport applications. Similarly, our sales staff are highly experienced and able to offer advice over the telephone, providing a free andefficient consultative technical service for all installations and projects.

Whether the product is stock or to a custom design specification, our insistence on quality standards guarantees our customer a product of the highest possible quality. Whether it is a high performance Goodridge product, or one of our many brand name items we ensure the highest standards are maintained, the standards expected of a progressive organisation determined to live up to its reputation for high quality.

BLEED NIPPLE BANJO BOLTS

MOTORCYCLE OIL TAKE OFFS

GOODRIDGE

Motorcycle Brakeline Kits

G U A R A N T E E D F O R E V E R